SRC
S Y S T E M
Pairing to a Bluetooth
Caution
When in addition to a mobile phone, you
:
would also like to connect a navigation system to
the SRC‑System™, make absolutely sure that the
navigation system is connected to the mobile phone.
The simultaneous connection of both devices to the
SRC‑System™ will result in a system error.
1. Switch on your SRC‑System™.
2. Press and hold the mobile button for at least 6 seconds
until the red and blue lights begin rapidly alternating.
3. Search for Bluetooth
4. Enter 0000 (4 zeros) as your PIN or passkey.
Answer a call
Reject a call
Terminate a call
12
®
mobile phone.
SRCS device on your phone.
®
During an incoming call tap the
mobile button or speak loudly any
word of your choice.
Remain silent for 15 seconds, or
press and hold the mobile button for
3 seconds during an incoming call.
Tap the mobile button during a call,
or let the other party terminate the
call.
Two-way intercom pairing options between two
people.
1. Switch on both SRC‑Systems™.
2. Hold down the channel "A" button on your equipment
for at least six seconds, until the red LED display flashes
quickly.
3. Repeat this step with the second SRC‑System™.
Operating the radio.
Turn on the
While in standby mode, press and
radio
hold the channel "B" button for
3 seconds.
Turn off the
While listening to the radio, press
radio
and hold the channel "B" button for
3 seconds.
Switch to
While listening to the radio, tap the
next preset
channel "B" button to cycle through
FM station
the six preset FM stations.
RDS on/off
While the radio is on, press and hold
(default: off)
volume up and volume down buttons
simultaneously for 3 seconds.
13