EURO-PRO V1935Q Guia De Inicio Rapido página 3

OPERATING INSTRUCTIONS
Assembling your Cordless Sweeper
Before you start:
Your Cordless Sweeper will require very little assembly. You should remove it from the
carton and familiarize yourself with all the components listed per the exploded view
drawing (pg.2). This will help you in the assembly and operation of your cordless
sweeper.
NOTE:
The charging adapter may be shipped inside the dust cup.
1. Insert the lower handle onto the power head. Fasten it with the captive nut and bolt
provided. (Fig. 1) The captive nut and bolt are found secured to the end where the
lower handle will be inserted.
2. Assemble the handle by inserting the lower handle extension tube
into the lower handle. Push until you hear it snap into place. Next,
push the plastic folding pivot onto the lower handle extension
tube until you hear it snap into place. Finally, insert the upper
handle into the forward folding until you hear it snap into
place. (Fig. 2)
3. Place the handle into the upward storage position.
4. Plug the charging adapter into the sweeper power
head charging jack. Plug the charging adapter cord
into a standard electrical outlet (120V., 60Hz.) The
green charging indicator light should illuminate.
If the charging indicator does not illuminate,
depress the on/off switch once to reset the unit.
CAUTION:
ALWAYS USE ADAPTOR SUPPLIED (ONLY) WITH
SWEEPER.
Lower Handle
Captive
Nut
Bolt
Fig. 1
Fig. 2
3
OPERATING INSTRUCTIONS
How to Operate Your Cordless Sweeper
NOTE:
Before using, please ensure that the cordless sweeper has been initially
charged for 20 hours.
Your cordless sweeper will only operate properly when the batteries are fully charged.
Your sweeper will operate for varying lengths of time on a full charge. This will depend
upon the type of surface being cleaned. (Longer operating time on bare floors vs
carpets.)
1. Push the on/off switch to operate the unit. To turn "Off", press switch again. (Fig. 3)
CAUTION:
Any electronic or electrical appliance should not be stored
in or exposed to areas of high heat or humidity. Do not
store your cordless sweeper close to stoves, radiators,
furnaces or in a bathroom or bathing area.
2. To fold the handle, press on the handle release button while bending the handle
forward. The folding pivot will click into the bent position. (Fig. 4)
3. To straighten the handle, simply lift the upper handle. The folding pivot will click
into the straightened position. (Fig. 5)
Fig. 4
"On/Off"
switch
Fig. 3
Handle
Release
Button
Fig. 5
4