Publicidad
Idiomas disponibles
Idiomas disponibles
• The radio signal is emitted and the radio module's red LED on the
inside of the cover will be illuminated for this period.
• After initialisation has been completed, DIP switch 1 should be reset
to "OFF" on the SW1 switch to deactivate the display LEDs. This
increases the service life of the batteries.
• Close the cover.
4
SW1 settings
DIP1
DIP2
12
Display LEDs
ON
LEDs on
(installation mode)
OFF LEDs are off to save the battery
(operating mode)
Extraneous signal recognition
ON
High contrast =
Light impulses with a high contrast
to the ambient light are accepted (strong solar
radiation, southern side, presence of bright light
sources)
OFF Low contrast =
Light impulses with a low contrast
to the ambient light are accepted (no solar
radiation, shady side, no other light sources)
02.2007 TR20G003 RE
Publicidad
