thermostat
• The thermostat knob controls the interior temperature of the ap-
pliance.
• The temperature selector knob is located on the right hand inside
wall of the refrigerator
OFF Setting: Unit is off.
MIN Setting: Generates the warmer temperature.
MED Setting: This setting will provide a normal operation tem-
perature. Adequate for most situations.
MAX Setting: Generates the coldest temperature.
• During high room temperatures e.g. on hot summer days, it may
be necessary to set the thermostat to the coldest setting (MAX).
This could cause the compressor to run continuously in order to
maintain a low temperature inside the cabinet.
• When first installing your refrigerator, set the thermostat knob at
MED. Let the refrigerator time to cool down completely before
adding food. It is better to wait 24 hours before adding food.
• When the thermostat control knob is set to OFF, the refrigerator
will not be running.
location of the refrigerator
• Before installing the refrigerator, remove all
packaging materials including bottom pads,
foam pads and tapes inside the refrigerator. Re-
move the protective film on the door and the
refrigerator cabinet.
• Keep the appliance away from heat sources and
avoid direct sunlight. Do not place the freezer
in moist or wet places to prevent the formation
of rust and the reduction of its insulating prop-
erties.
25