Technical Data - WOLFF FRÄSMASTER 18V Instrucciones De Funcionamiento

Technical data

Li-ion battery capacity
Battery voltage
Charging time (battery)
Idle speed
Cutter blade mounting hole
Cutter blade diameter
Blade thickness
Groove depth adjustment
Sound pressure level
Sound power level
Vibration level
Weight
Subject to change without prior notice.
The noise and vibration values were determined in accordance with EN 62841. The specified measured
values apply to new tools. In the context of everyday use, the noise and vibration values will vary depending
on how the power tool is used, particularly according to the type of material being processed.
NOTE
The vibration level specified in these instructions was measured using a standardized method of
measurement according to EN 62841 and can be used for the purpose of comparing power tools. It allows
you to calculate a preliminary estimate of the exposure level. The specified vibration level is representative
of the power tool's main applications. However, if the power tool is used for other applications, with different
insert accessories, or is not properly maintained, the vibration level may vary. This can increase the
exposure level significantly over the working period as a whole. For an accurate estimate of the exposure
level, you should also consider the times when the unit is turned off or is running but is not actually being
used. This can reduce the exposure level significantly over the working period as a whole. Identify additional
safety measures to protect the operator from vibration effects such as: maintaining the tool and the
accessories, keeping hands warm, and organizing work patterns.
Ah
V
min
rpm
mm
mm
mm
mm
L (dB)
pA
L (dB)
WA
A (m/s 2 )
h
kg
lbs
a) mm / inch
b) mm / inch
c) mm / inch
FRÄSMASTER 18V
5.0
18.0
max. 45
5,000
20
130
2.6
0–6, infinitely variable
81.3 (K = 3 dB)
92.3 (K = 3 dB)
<2.5 (K = 1.5 m/s 2 )
5.5 (including battery)
12.2
445/17.5
212/8.4
336/13.2
29 29