Inserting And Removing Burs - B.A. International BA ULTIMATE Instrucciones De Uso

6556067_EN.book Seite 25 Montag, 18. April 2016 2:41 14
Operating Instructions BA ULTIMATE
65 56 067 D3560.201.09.02.02
5.1.3 Highspeed handpiece with NSK PTLCL connection
Attaching the turbine
➢ Insert the turbine until it audibly clicks into place.
Removing the turbine
✔ The turbine is at a standstill.
➢ Slide back the sleeve (A) on the quick coupling toward the supply
hose and pull the turbine while turning it slightly. Do not pull on or
hold the supply hose.
5.2

Inserting and removing burs

IMPORTANT: Check the push button to make sure it moves freely!
Free movement of the pushbutton
NOTICE! Use only burs and diamond polishers that are sharp and
Use only undamaged burs
undamaged. Use clean burs and diamond polishers to avoid dirt in the
clamping system.
5 Operation
25