Maintenance; Testing The Fg Clamping System - B.A. International BA ULTIMATE Instrucciones De Uso

6556067_EN.book Seite 41 Montag, 18. April 2016 2:41 14
Operating Instructions BA ULTIMATE

8 Maintenance

8 Maintenance
Elastomers, e.g. O-rings, must be replaced depending on their degree
Replacing elastomers
of wear.
8.1

Testing the FG clamping system

Interval
Test the FG clamping system at least once a month.
Required accessories
Chuck tester
Process
✔ The expiry date of the chuck tester (A) has not elapsed.
1. Insert the chuck tester into the FG clamping system [ → 25].
2. Tighten the chuck tester until the marking ring appears (withdrawal
force: 22 N)
41
65 56 067 D3560.201.09.02.02