Metra 98-8999 Instrucciones De Instalación página 2

Mitsubishi
1. Snap the Mitsubishi trim plate onto
the front of the pocket. (Figure A)
2. Secure the Mitsubishi/Subaru
brackets to the pocket using the
(4) #6 x ¼" Phillips "flat head"
screws provided. (Figure A)
3. Secure the factory brackets to the
shaded bosses (see B2) with (4) #8
x 1/4" Phillips "pan head" screws
provided, and then secure the
entire assembly to the sub-dash.
(Figure B)
(Figure A)
B2
(Figure B)
98-8999
1. Snap the Subaru trim plate onto
the front of the pocket. (Figure A)
2. Secure the Mitsubishi/Subaru
brackets to the pocket using the
(4) #6 x ¼" Phillips "flat head"
screws provided. (Figure A)
3. Secure the factory brackets to the
shaded bosses (see B2) with (4) #8
x 1/4" Phillips "pan head" screws
provided, and then secure the
entire assembly to the sub-dash
(Figure B)
2
Subaru
(Figure A)
B2
(Figure B)