Service Information - Black+Decker LHT321 Manual De Instrucciones

Podadora de setos 20 v máx
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MaInTenance
warnInG:
PACk BEFORE SERVICING, CLEANING
OR REMOVING MATERIAL FROM THE
GARDENING APPLIANCE.
The cutting blades are
made from high quality,
hardened steel and
with normal usage,
they will not require
resharpening. However,
if you accidentally hit a
wire fence (figure M),
stones, glass or other
hard objects, you may
put a nick in the blade. There is no need
to remove this nick as long as it does not
interfere with the movement of the blade.
If it does interfere, remove the battery and
use a fine toothed file or sharpening stone
to remove the nick. If you drop the trimmer,
carefully inspect it for damage. If the
blade is bent, housing cracked, or handles
broken or if you see any other condition
that may affect the trimmer's operation
contact your local BLACk+DECkER
Service Center for repairs before putting it
back into use.
Fertilizers and other garden chemicals
contain agents which greatly accelerate the
corrosion of metals. Do not store the unit
on or adjacent to fertilizers or chemicals.
with the battery removed, use only mild
soap and a damp cloth to clean the unit.
Never let any liquid get inside the unit; never
immerse any part of the unit into a liquid.
Prevent the blades from rusting by applying
a film of light machine oil after cleaning.
This Class B digital apparatus complies
with Canadian ICES-003.
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
noTe: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning
REMOVE BATTERY
the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving
antenna.
M
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications to this unit
not expressly approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
This Class B digital apparatus complies
with Canadian ICES-003.
acceSSorIeS
warnInG:
trimmer with any type of accessory or
attachment. Such usage might be hazardous.
The rBrc™ Seal
The RBRC™ (Rechargeable
Battery Recycling Corporation)
Seal on the lithium-ion battery (or
battery pack) indicates that the
costs to recycle the battery (or battery pack)
at the end of its useful life have already been
paid by BLACk+DECkER. In some areas, it
is illegal to place spent lithium-ion batteries
in the trash or municipal solid waste stream
and the Call 2 Recycle program provides an
environmentally conscious alternative.
Call 2 Recycle Inc., in cooperation with
BLACk+DECkER and other battery
users, has established the program in the
United States and Canada to facilitate the
collection of spent lithium-ion batteries.
Help protect our environment and conserve
natural resources by returning the tool to
an authorized BLACk+DECkER service
center for recycling. You may also contact
your local recycling center for information on
where to drop off the spent battery, or call
1-800-8-BaTTery.
RBRC® is a registered trademark of Call 2
Recycle, Inc.

ServIce InforMaTIon

All BLACk+DECkER Service Centers are
staffed with trained personnel to provide
customers with efficient and reliable power
tool service. whether you need technical
advice, repair, or genuine factory replacement
parts, contact the BLACk+DECkER location
nearest you. To find your local service
location, call: 1-800-544-6986 or visit
www.blackanddecker.com
9
DO NOT use the hedge

Publicidad

Tabla de contenido
loading

Tabla de contenido