Honda CR-V 1997-2001
1. Open the glove box, squeeze
the retaining clips and remove
the stoppers.
2. Lower the glove box and remove (2)
Phillips screws from the left edge.
3. Remove (2) Phillips screws
from the lower steering column
panel and remove.
4. Unclip the lower console cover (below
the ashtray and pocket) and remove.
5. Remove (2) Phillips screws from the
base of the center console, open
the console pocket and remove the
(4) outer screws exposed.
(Figure A)
Dash Disassembly 99-7898
6. Unclip the center console and remove.
7. Remove (2) Phillips screws securing
the radio trim bezel, disconnect the
wiring, and remove the trim bezel/
radio assembly. (Figure A)
8. Remove (4) Phillips screws
securing the radio to the bezel
and remove.
9. Cut and remove all of the mounting
clips on the radio housing EXCEPT
clips "B" and "H" (the clips can be
identified by the stamped letter near
each clip). (Figure B)
Continue to kit assembly
"B"
"B"
"H"
"H"
(Figure B)
Honda CR-V 2002-2006
1. Remove (2) Phillips screws
from the bottom edge of the radio
trim bezel. (Figure A)
2. Unclip the trim bezel and remove.
3. Remove (4) Phillips screws
securing the factory radio and
disconnect the wiring.
4. Cut and remove all of the mounting
clips on the radio housing EXCEPT
clips "M" and "H" (the clips can
be identified by the stamped letter
near each clip). (Figure B)
Continue to kit assembly
10
(Figure A)
"M"
"M"
"H"
"H"
(Figure B)