Honda Civic Se 2005 (Only) - Metra 99-7898 Instrucciones De Instalación Para La Pieza

Honda Civic
1999-2000
7. Cut the zip ties securing
the radio and climate
control wires, slide the
dash trim bezel/radio
assembly from the dash
cavity and disconnect
the wiring.
8. Cut and remove all
of the mounting clips
on the radio housing
EXCEPT clips "B" and
"H" (the clips can
be identified by the
stamped letter near
each clip). (Figure B)
Continue to kit
assembly
Dash Disassembly 99-7898
1. Unsnap and remove the trim ring from
around floor shifter.
2. Unsnap and remove larger trim around
floor console shifter.
3. Remove (2) Phillips screws from in
between cup holder and shifter.
(Figure A)
4. Unsnap sides of console (2 snaps per
(Figure A)
Honda Civic SE 2005
side) and remove with power
outlet assembly.
5. Remove (2) Phillips screws from under
radio assembly, facing up. (Figure A)
6. Remove (3) screws securing the climate
control pod to the back of the dash trim
bezel and remove the pod. (Figure B)
7. Remove (4) Phillips screws from each
(Figure B)
9
(only)
side securing the factory head
radio to the bracket assembly and
remove the radio.
8. Cut and remove all mounting clips on
the radio housing, EXCEPT clips "B" and
"H" (hooks can be identified by the letter
stamped near each clip). (Figure C)
Continue to kit assembly
"B"
"H"
"H"
(Figure C)
"B"