Acura RSX
2002-2006
(except "S" model)
factory pocket is present, remove (4) Phillips screws securing the pocket to the
bracket assembly and remove). (Figure A)
5. Cut and remove the all mounting clips on the radio housing EXCEPT clips "J"
(the clips can be identified by the stamped letter near each clip). (Figure B)
6. Mount the rear support bracket (R2) to the back of the radio housing with (2) #8
x 3/8" Phillips pan head screws supplied.
Continue to kit assembly
(Figure A)
Dash Disassembly 99-7898
"J"
"J"
(Figure B)
Acura TL 1996-1998
1. Using a small screwdriver, unclip the
perimeter of the radio trim bezel.
(Figure A)
2. Disconnect the climate control
and rear defroster wiring and
remove the bezel.
3. Remove (4) Phillips screws securing
the factory radio/trim bezel
assembly. (Figure A)
4. Loosen (2) Phillips screws securing
the back of the radio to the metal
(Figure A)
5
housing and slide the radio out (it is
not necessary to remove the screws
securing the metal).
5. Disconnect the wiring.
6. Cut and remove all of the mounting
clips on the radio housing EXCEPT
clips "B" and "K" (the clips can be
identified by the stamped letter near
each clip). (Figure B)
Continue to kit assembly
"B"
"B"
"K"
"K"
(Figure B)