Dash Disassembly; Acura Cl 1997-1999; Acura Integra 1990-1993; Acura Integra 1994-2001 - Metra 99-7898 Instrucciones De Instalación Para La Pieza

Acura CL 1997-1999

1. Unclip the radio trim
bezel and disconnect
the clock and climate
control wiring.
(Figure A)
2. Remove (2) 8mm
h ex head screws
securing the factory
radio and disconnect
the wiring.
(Figure A)
3. Cut and remove all
of the mounting clips
on the radio housing
EXCEPT clips "A" and
"H" (the clips can
be identified by the
stamped letter near
each clip). (Figure B)
"H"
4. Mount the rear support
bracket (R1) to the
back of the radio
housing with (2) #8
(Figure B)
x 3/8" Phillips pan
head screws supplied.
(Figure B)
Continue to kit assembly

Dash Disassembly 99-7898

Acura Integra 1990-1993

1. Remove (3) screws
from each side of the
center console and
remove the console.
2. Remove (2) screws
securing the factory
radio to the sub-dash
support bracket. Slide
the radio/pocket
assembly out and
disconnect the wiring.
(Figure A)
"A"
3. Cut and remove all
of the mounting clips
on the radio housing
EXCEPT clips "C" and
"H" (the clips can
be identified by the
"H"
stamped letter near
each clip). (Figure B)
Continue to kit
assembly
1. Remove the cover cap located under the
2. Remove (2) screws from the rear corners of the
3. Remove the ashtray and (2) screws exposed.
4. Unsnap the ashtray housing and disconnect the
5. Remove the gear shifter knob and unsnap the
(Figure A)
"C"
"C"
"H"
"H"
(Figure B)
(Figure A)
3

Acura Integra 1994-2001

emergency brake and remove (2) screws exposed.
lower dash trim bezel and remove.
cigarette lighter harness.
shifter trim.
Continue on next page