Kohler Cabriole K-14616 Manual Del Usuario página 4

Connecting
Nut
1. Faucet Installation
- Insert the flexible hoses into the deck. Angle the mounting stud so
the connecting nut fits through the hole.
- Center the washer and faucet over the hole.
- Insert the supplied hex wrench into the lift rod hole. Tighten the nut
inside until the faucet is firmly held in place.
- Check to be sure the nut is centered and the flexible hoses hang
freely.
- Remove excess putty from escutcheon, if installed.
- Attach the hoses to the water supplies. When facing the front of the
faucet, the left hose is hot water, the right hose is cold water.
- Lift the faucet handle. Turn handle left for hot water, right for cold
water or to the center for warm water.
B
1002277-2-
Mounting Stud
Hose
continued
4
Kohler Co.