Telcoma Automations PASSO Instrucciones Para La Instalación página 53

GB
CANCELLATION OF THE USER CODES
One or more user codes can be cancelled at any time from the recei-
ver's memory.
press and hold the key for approx. 2 seconds until the keypad be- #
•
eps once.
introduce the MASTER code followed by , the LED
•
enter 60# , the LED ☼ starts to flash.
•
enter the user code to cancel followed by . The keypad will beep
•
and the LED ☼ switches off.
Repeat the operation to cancel additional user codes.
•
Example
I want to cancel the user code 789
# 2233# 60#
2 sec. MASTER code command
CANCELLATION OF ALL MEMORISED USER CODES
All user codes can be cancelled from the receiver unit's memory with a
single command:
press and hold the key for approx. 2 seconds until the keypad be- #
•
eps.
introduce the MASTER code followed by , the
•
enter 70# , the LED starts to flash.
☼
•
Introduce the MASTER code again followed by , the buzzer beeps
•
once and the LED switches off.
☼
Example
I want to cancel all memorised codes
# 2233# 70#
2 sec. MASTER code command
# remains on.
☼
#
789#
code to be cancelled
# ☼ LED switches on.
#
2233#
MASTER code
53