Before The First Use; Temperature Control - Domo DO906K/02 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 47

BEFORE THE FIRST USE

· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth
and the inside with a wet, lukewarm cloth. Avoid placing the cabinet in a narrow recess
or near any leave source, direct sunlight, or moisture. Let air circulate freely around the
cabinet.
· Select a place with a strong, level floor.
· Allow 10 cm of space between the back of the refrigerator and any adjacent wall.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly
on the evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated
on the rating label of your appliance corresponds to the voltage in your home. A different
voltage could damage the appliance.
· The appliance must be grounded. The manufacturer is not responsible for damages that
may occur as a result of usage without grounding.
· For uneven surfaces, front feet can be aligned.
· After installation, leave the freezer for 24 hours before turning it on. This way the
refrigerant can settle.
· Allow the appliance to run empty for 8 hours so the compartment can cool to the
appropriate temperature.
· The appliance may only be used indoors.
· The climate class indicates the minimum and maximum ambient temperature for the
proper operation of an appliance. You can find the climate class on the type plate on the
back of the appliance.
· SN: Subnormal: ambient temperature between 10°C and 32°C
· N: Normal: ambient temperature between 16°C and 32°C
· ST: Subtropical: ambient temperature between 16°C and 38°C
· T: Tropical: ambient temperature between 16°C and 43°C
USE

TEMPERATURE CONTROL

You can set the temperature on the back of the appliance, with 1 being
the warmest and 5 the coolest. Position 3 is the recommended position for
normal use.
The running time and temperature are affected by where the fridge is
located, how often the door is opened and the temperature of the room the
fridge is located in.
www.domo-elektro.be
41
DO906K/02

Publicidad

Tabla de contenido
loading

Tabla de contenido