Ensuring Correct - DT Communications SafeKare CRU101A Manual Del Usuario

NAME NAME NAME NAME NAME NAME
Pinned To Blouse Pinned To Blouse
Figure 8. Placing the Badge or Fob on the patient.
After completing the range check, the caregiver unit is ready to use. To begin, it is
suggested that the unit be switched to the "M" (medium range setting). After you have
become familiar with using the caregiver system, you can make adjustments to suit your
environment
2.3 Ensuring Correct Usage of the SafeKare™ System
Some tips on using the system to ensure the most effective usage.
Never turn off the caregiver receiver when using the system.
Charge the caregiver receiver at night, but keep it turned on if still monitoring a
patient at night.
Never let the battery run completely dead. This could damage the battery.
Check on the patient periodically to ensure that the badge or fob is still attached to
the patient.
When using the system outside of the home, use the short range "S" mode.
Consult the User's Manual if you have problems.
Notice, FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
DT COMM Inc.
Hanging Hanging
Position
Position
Hanging On
Hanging On
Belt Loop Belt Loop
10
Attached to Hand Bag Attached to Hand Bag
Version 1.4