Fob Option : Activating The - DT Communications SafeKare CRU101A Manual Del Usuario

1.4 Fob Option: Activating the Patient Fob
Place the patient fob FOB101A face down on a flat table like surface. Remove the screw
located in the center of the fob and remove the cover. See Figure 3.
Figure 3 Removing The Back of The Fob
The fob battery sits on the backside of the circuit board. Remove the battery from the
protective plastic pouch that came in your kit. Insert the battery as shown in Figure 4. Note,
the battery must be placed into the holder with the minus (-) side of the battery against the
circuit board. The plus (+) side of the battery faces away from the circuit board. Replace
the circuit board after the battery is installed. Replace the cover and screw the back
together. The fob is now ready to use.
DT COMM Inc. 6 Version 1.4