Suaoki PF3S Serie Manual Del Usuario página 14

6.Slope Lock-on Measurement
※ Note:
● Angle compensation: ± 20°
● This mode is mainly used to measure the distance to a small object in long range.
Short press to switch to slope lock-on measurement mode. Aim at the target and
M
short press " ". Flag icon
both sides of the measured target. After 1.5s, the flagpole would stop flashing. This
means that the rangefinder has locked on the target and then the measured distance
would be displayed.
Slope-adjusted distance
would start flashing. Scan slowly back and forth on
Slope-adjusted distance
EN-8
Straight-line distance
Slope-adjusted distance
Angle