Setting Up Your LCD TV Display
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
Product Information Guide
located in the
Proper Location for Your LCD TV Display
Consider the following environmental factors when you are deciding where to install your LCD TV
display:
•
Do not store or use the LCD TV display in locations that are exposed to high heat, direct
sunlight, or extreme cold.
•
Avoid moving the LCD TV display between locations with extreme temperature differences.
For more information, see "Specifications for Your LCD TV Display" on
•
Do not subject the LCD TV display to severe vibration or high impact conditions. Do not
place the LCD TV display inside a car trunk.
•
Do not store or use the LCD TV display in locations where the LCD TV display would be
exposed to high humidity or dusty environment.
•
Do not place the LCD TV display in a location where water or other liquids could spill on or
into the LCD TV display.
Connecting Your LCD TV Display
Your LCD TV display has four standard connectors that can be used to connect devices.
NOTE:
Before you connect your LCD TV display, ensure that you have all the proper cables. Some cables
may come with the device you are connecting. For a list of cables that came with your LCD TV display,
"Package Contents"
see
Quality
Cable and Connector
Good
.
on page 9. To order additional cables, contact Dell.
When to Use
Coaxial (RF) carries the video and audio
from one cable. The coaxial connector is
labeled, NTSC/Analog Cable or
HDTV/Digital Cable on your LCD TV
display. To locate the connector, see "Bottom
View" page 8.
Setting Up Your LCD TV Display
2
.
page 38
11