Customizing The Units Settings; Changing The Time Settings - Jeep TRAILGUIDE El Manual Del Propietario

C Y T G
USTOMIZING OUR RAIL

Customizing the Units Settings

E
Press MENU two times, highlight Units Setup, and press OK.
N
Distance and Speed—allows you to change the units used to
measure distance. Statute shows speed in miles per hour and
elevation in feet. Metric shows speed in kilometers per hour and
elevation in meters.
Heading Display—displays your direction of travel in cardinal
letters, degrees, or mils.
Location Format—allows you to select from a variety of formats.
Use the default setting if you are unfamiliar with location formats.
Heading—allows you to select a heading. True shows true north
headings, and Magnetic automatically calculates the magnetic
variation for the geographical area. User allows you to input a
magnetic variation in the Magnetic Variance field. Grid provides
a true north heading as determined by the Location Format.
Vertical Speed—displays vertical speed in feet/minute, meters/
minute, or meters/second.
Elevation—displays elevation in feet or meters.
Datum—allows you to select from over 100 different map datums
to match almost any paper map or chart. Use the default setting if
you are unfamiliar with datums.
38
> C U
UIDE USTOMIZING THE NITS AND
T S
IME ETTINGS
To restore these settings, press the MENU key, highlight Restore
Settings, and press OK.

Changing the Time Settings

Press MENU two times, highlight Time Setup, and press OK.
Time Format—displays time in a 12- or 24-hour format, or UTC.
Time Zone—select a time zone from the list. If your time zone is
not on the list, select Other to
manually enter the UTC Offset.
If you are not certain what the
offset is between UTC and the
local time zone, enter incremental
offset values until the correct
local time appears. As you move
west of the Prime Meridian (0°
longitude) the offset is negative (-), and as you move east the offset
is positive (+).
Daylight Savings—turn on (Yes), off (No), or set to Automatic
(Auto) if it is available.
To restore these settings, press the MENU key, highlight Restore
Settings, and press OK.
Trail Guide Owner's Manual
™