Caring For The Trail Guide - Jeep TRAILGUIDE El Manual Del Propietario

Caring for the Trail Guide

The Trail Guide is constructed of high quality materials and does
not require user maintenance other than cleaning.
Cleaning the Case
Clean the unit's outer casing (except for the screen) using a cloth
dampened with a mild detergent solution and then wipe dry.
Avoid chemical cleaners and solvents that may damage plastic
components.
Cleaning the Screen
Clean the screen using a soft, clean, lint-free cloth. You may use
water, isopropyl alcohol, or eyeglass cleaner if needed. To use these
cleaners, apply the liquid to the cloth and wipe the screen.
Storage
Do not store the Trail Guide where prolonged exposure to
temperature extremes may occur (such as in the trunk of a car), as
permanent damage may result.
Avoid Theft
To avoid theft, take your Trail Guide with you or remove it from
view when you leave your vehicle.
Trail Guide Owner's Manual
™
A
Using the Trail Guide Responsibly
The Trail Guide is equipped with a Safe Mode feature to improve
driver safety. When your vehicle is moving, Safe Mode disables
all functions that require significant operator attention and could
become a distraction when driving.
Read the safety information on
and use your Trail Guide safely and responsibly.
Battery Temperature Warning
Your Trail Guide contains an internal lithium-ion battery, which
can store more energy than standard batteries. All batteries slowly
lose the amount of energy they can hold over time. To maximize
battery life, limit the unit's prolonged exposure to excessive heat
and direct sunlight.
If Your Trail Guide Locks Up...
On rare occasions, your Trail Guide may freeze or lock up. In this
case, reset it by pressing the Power key and the IN key at the same
time. The unit turns off. The unit will operate normally when you
turn it on again.
> C T G
PPENDIX ARING FOR THE RAIL
pages iii–iv to learn how to install
UIDE
E
N
49