Adding Maps To Your Trail Guide - Jeep TRAILGUIDE El Manual Del Propietario

Adding Maps to Your Trail Guide

You can purchase additional MapSource
your Trail Guide.
Purchasing Additional MapSource Maps
In order to unlock and use additional MapSource data, you need
your Unit ID number (see page
page 51). After you unlock your map data, you can transfer it to
the Trail Guide using MapSource and your personal computer.
Note that the preloaded maps on your Trail Guide are protected and
cannot be erased. For example, if you add additional maps to your
Trail Guide, you will not overwrite the original maps. If you load
additional maps to the Trail Guide, these maps are not protected.
The additional maps will be overwritten each time you load new
maps to the unit.
Trail Guide Owner's Manual
™
maps from Garmin for
®
40) and serial number (see
A
PPENDIX
Controlling Map Views on the Map Page
You can view a list of your map families on the MapSource
Info page.
To view the installed maps:
1. Press the MENU key, highlight Settings, and press OK.
2. Highlight Map Info and press OK. The MapSource Info
page opens.
Map families loaded
The MapSource Info page lists the MapSource maps that are
loaded onto the unit. For example, North American City Select v6
and European City Select v6 might be listed. These are actually
map families: each map family may contain numerous smaller
maps.
> A M Y T G
DDING APS TO OUR RAIL UIDE
Individual maps loaded
E
N
47