KTM Power Parts 60112092140 Manual Del Usuario página 8

Removing the GPS device
To take the TOMTOM Rider 2 out of the holder, push against the locking
cover from above with your left hand, as you did when inserting the device
(Figure (A)) until you can feel the resistance of the stop. The key can now
be easily inserted in the locking cylinder. To release the lock, turn the key
all the way toward you to the stop (counterclockwise). You can now turn the
locking cover and key clockwise to the stop of the open mechanism. Reach
into the holder from above as shown in Figure (B) to push the large locking
knob of the original TOMTOM plastic holder down to the point where the
detents release the device. The TOMTOM Rider 2 can now be lifted up out
of the device.
B
The device is now unlocked.
Please repeat this procedure several times. You will find that inserting and
locking the device in the Touratech handlebar holder, which at first appears
to be somewhat awkward, is actually easy to perform without any difficulty.
Try it!
8