Orientation; The Frame; The Wheels - Mutsy EVO Manual De Instrucciones

· Assemble the rear wheels
· Assemble the front wheels
· Place the pram body or seat

Orientation

· References in the text to the front, rear, left or right side of the stroller are
described from the perspective of a user walking behind the stroller.

The frame

Unfold the frame (a, b)
· Push the frame lock (17) inwards and move the top of the frame up-
wards until you hear a click.
· Push the buttons on both sides of the push bar and turn the push bar
upwards.
· The push bar has 4 different height positions. Release the buttons
when the push bar is in the desired position.
· Before use always check that the stroller has been unfolded and se-
cured correctly.
Fold the frame (d)
· Stand behind the frame and put the frame on the brake.
· Push the buttons on both sides of the push bar and turn the push bar
downwards until it has reached the lowest position.
· This position is indicated by means of a marking on the hinge point.
· Pull the unlock buttons on the inner side of the frame towards you and
then push the top part of the frame downwards.
· The unfold lock will automatically lock when folding.
· The frame is folded in an extra compact way if you first lock the swivel-
ling wheels before you fold.

The wheels

Assemble the rear wheels (e)
· Push the button and slide the axle of the rear wheel in the rear wheel
housing until you hear a click. Pull the wheel to check that it has been
attached firmly.
Disassemble the rear wheels (f)
· Push the button on the outside of the rear wheel and pull the wheel
from the rear wheel housing.
Assemble the front wheels (g)
· Slide the axle of the front wheel upwards in the front wheel housing
EN
7