Mutsy EVO Manual De Instrucciones página 19

Make sure that the attachment points are in a vertical position.
· The adapter marked with 'R' is placed on the right side of the frame, the
adapter marked 'L' is placed on the left side.
· Slide the adapters in the attachment parts and press solidly until you
hear a click.
Place the Maxi-Cosi car seat on the adapters
· Orientate the Maxi-Cosi car seat such that it is directed rearwards on
the frame.
· Hold the Maxi-Cosi car seat with the central hinge points of the support
bar directly above the adapters.
· Lower the Maxi-Cosi car seat and press solidly into the adapters until
you hear a click.
· Check that the Maxi-Cosi car seat has been placed horizontally and has
been attached properly by trying to lift it from the frame.
Remove the Maxi-Cosi car seat from the adapters
· Operate the unlocking system of the Maxi-Cosi car seat.
· Lift the Maxi-Cosi car seat straight up from the frame.
Remove the Maxi-Cosi adapters from the frame (z2)
· Pull the unlock buttons on the inside of the adapters upwards and ver-
tically remove the adapters from the attachment points.
EN
13