Fuse Replacement - Broan Best KEX3500 Manual Del Usuario

HALOGEN BULBS
This range hood requires two halogen bulbs
(Type JC, 12Volt, 20Watt Max, G-4 Base).
ALWAYS SWITCH OFF THE ELECTRICITY
SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.
To change bulbs:
1. Loosen the ring nut by turning it
counterclockwise.
2. Remove the bulb by pulling sideward - DO
NOT ROTATE. CAUTION: BULB MAY BE
HOT!
3. Replace with Type JC, 12Volt, 20Watt Max, G-4 Base halogen bulb. Do not
touch replacement bulb with bare hands!

FUSE REPLACEMENT

SWITCH OFF THE ELECTRICITY SUPPLY.
Remove the decorative flue.
Remove the electrical box support.
Open the electrical box working from the
inside of the hood.
Replace with the same type of fuse (5x20mm,
4A, 125V).
FUSE
ELECTRICAL
BOX
- 13 -
RING NUT
DECORATIVE
FLUE
ELECTRICAL
BOX
SUPPORT