Electric Bratt Pan; Multi-Purpose Appliance; Cleaning The Interior; Main Components - ALI QUEEN9 Serie Instrucciones Para Instalación, Uso Y Mantenimiento

• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Pan lifting microswitch
• Remove the front panel.
• Disconnect the device's electrical connections.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Pan movement motor
• Remove the front panel.
• Lower the well completely.
• Disconnect the device's electrical connections.
• Detach the connection with the pan lifting "bolt".
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Screw nuts and manual pan movement system (bolt)
• Remove the front panel.
• Lift the pan completely, locking it firmly in that position
(e.g.with a bar). Important:measure how far tightened the
"bolt" is with regard to the screw nut before removing the
components.
• Disconnect the "bolt" from the handwheel shaft.
• Undo the screw nut fixings.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.

ELECTRIC BRATT PAN

Replacing the heating element
• Remove the front panel.
• Remove the screws underneath the heating element box.
• Remove the terminals cover.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the temperature thermostat, the control knob,
the indicator lamp and the safety thermostat
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Pan lifting microswitch
• Remove the front panel.
• Disconnect the device's electrical connections.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Pan movement motor
• Remove the front panel.
• Lower the well completely.
• Disconnect the device's electrical connections.
• Detach the connection with the pan lifting "bolt".
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Screw nuts and manual pan movement system (bolt)
• Remove the front panel.
• Lift the pan completely, locking it firmly in that position
(e.g.with a bar). Important:measure how far tightened the
"bolt" is with regard to the screw nut before removing the
components.
• Disconnect the "bolt" from the handwheel shaft.
• Undo the screw nut fixings.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.

MULTI-PURPOSE APPLIANCE

Replacing the heating element and the indicator light.
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the working thermostat and safety thermostat.
• Remove the control panel.
• Remove the bulb from its seat on the well.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.

17 CLEANING THE INTERIOR

• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.

18 MAIN COMPONENTS

GAS BRATT PAN

• Gas valve
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Solenoid fill valve
• Indicator light.
• Working thermostat
• Safety thermostat
• Tank movement motor
• Tank movement microswitch
• Tank movement screw nut
ELECTRIC BRATT PAN
• Heating element
• Indicator light.
• Safety thermostat
• Working thermostat
• Tank movement motor
• Tank movement microswitch
• Tank movement screw nut
MULTI-PURPOSE APPLIANCE
• Working thermostat
• Safety thermostat
• Heating element
• Indicator light.
11