• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the temperature sensor and safety thermostat.
• Drain off all the oil from the well
• Open the door.
• Remove the control panel.
• Unscrew the locking nut in the well.
• Remove and replace the component.
• Change the sensor/bulb sealing O-ring in the well.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the main switch, electronic igniter, fan, fuses.
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
ELECTRONIC ELECTRIC FRYERS
Replacing the heating element
• Drain off all the oil from the well
• Remove the control panel.
• Disconnect the electrical connections to other devices.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the temperature sensor and safety thermostat.
• Drain off all the oil from the well
• Open the door.
• Remove the control panel.
• Unscrew the locking nut on the heating element flange.
• Disconnect the electrical connections to other devices.
• Remove and replace the component.
• Change the sensor/bulb sealing O-ring in the well.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
17 CLEANING THE INTERIOR
• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.
18 MAIN COMPONENTS
GAS FRYERS
• Gas valve
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Piezoelectric ignition
• Safety thermostat
ELECTRIC FRYERS
• Safety thermostat
• Working thermostat
• Heating element
ELECTRONIC GAS FRYERS
• Gas valve
• Main burner
• Pilot burner
• Thermocouple
14
• Igniter
• Digital temperature control thermostat.
• Safety thermostat
• Electronic igniter
ELECTRONIC ELECTRIC FRYERS
• Digital temperature control thermostat.
• Safety thermostat
• Heating element