JUST ONE HELMET J12 Instrucciones De Uso página 27

USER'S INSTRUCTIONS
EN
INTERNAL PARTS
4.A 4.B
The internal parts of "JUST 1 Helmets" (central pads,
right and left cheek pads), can easily be removed to be
washed and/or replaced.
Inner side padding:
CHEEK PADS (Assembly and disassembly)
The cheek pads are fixed to the inner lining of the helmet
through three press studs and two tabs.
REMOVING see fig. 4A
4.C
The removable cheek pad is fixed to the shell through
three press studs and two tabs to remove, unfasten the
three studs and tabs by slightly pulling outwards. After
unfastening the buttons and tabs, slide out the pad (see
fig. 4.B).
ASSEMBLY see fig. 4C
Follow this procedure to fit in the cheek pads :
Verify the correct positioning of the removable cheek
pads and slightly press and fasten the studs and push
j U S T O N E H E L m E T S . C O m
27