KTM Power Parts 61408916544 Manual Del Usuario página 9

- Pull off rubber grommet .
- Slip out the cables.
- Take off the license plate holder support.
Removing the turn signal
- Remove screws .
- Swivel each half of the license plate holder support outwards and
detach in area .
- Hang the tail light to the side.
NOTE
If the LED turn signals (from the technical accessories) are used
with the short license plate holder support, the original license plate
holder support does not need to be disassembled.
- Remove cable holder .
- Disconnect the plug-in connector of left turn signal
signal .
- Remove nuts with the washers.
- Remove the turn signal.
and right turn
9