Safety Instructions - KNOVA KN 8316 Manual De Instrucciones

OVERVIEW
KN 8316 manifold electronic gauge determines the distance to the object through
electronic signals with high speed and visual display. The tool with built‑in
computer chip has the function of memory, and it can be used in continuous
integration measurement, automatic areas and volume counting. It is an ideal
tool for building and decoration industries (for example, land agent, upholstery
designer and craftsman, etc.)
The tool has the function of laser orientation and level bubble assistant locating
function. It will send out a line of highlighted red laser beam to make you aim at
the object easily when using. The automatic temperature compensation and key
indication function of the tool can make the measuring result more accurately,
and at the same time show the current environment temperature precisely.
KN 8316 manifold electronic gauge is the Class II laser tool conforming to EN
60825‑1 safety rule.

SAFETY INSTRUCTIONS

Failure to follow the instructions listed below may cause personal injury.
• Read and understand all instructions prior to any operation.
• Do not remove any label from the tool.
• Do not operate the tool with the presence of flammable/explosive gases.
• Do not operate .the laser tool around the children or allow children to operate
the laser tool, failure to do so will injure eyes of children.
• Do not stare into the laser beam.
• Do not project the laser beam directly into the eyes of others.
• Do not set up the tool at eye level or operate the tool on or near a reflective
surface, as the laser beam could be projected into your eyes or the eyes of others.
• Do not observe the laser beam
by using optical tools such as
binoculars and magnifying glass.
• Remove the battery when
storing the tool for an extended
period of time in case of
the deterioration of battery
and its damage to the tool.
Manifold Electronic gauge
Model: KN 8316
Operation Manual
WARN INg
DANgER
Class II Laser Product
Maximum Power Output< lmW
Wavelength: 630‑660nm
Do not stare into beam!
Avoid direct eye exposure!
This tool emits a laser radiation!