KNOVA KN 8316 Manual De Instrucciones página 8

Volume
• Press MODE key to select measurement mode.
When "
the current measurement mode is volume.
• The length character "L" on the display will blink
showing the length measurement you will be
firstly taking. Press READ key to take length
measurement that is displayed on upper
portion of the screen. (Step 1);
• The width character "W" on the display will blink
showing the next measurement to take. Press
READ key to take width measurement that is
displayed on upper portion of the screen (Step 2);
• The height character "H" on the screen will blink
showing the next measurement to take. Press
READ key to take height measurement that is
displayed on upper portion of screen. (Step 3);
• Then the volume is automatically displayed
on the lower portion of the screen;
• Press the READ key again will toggle back
and forth between the length, width and height
measurement on the upper portion of the screen;
• Press MODE key to clear and begin new volume
measurement and computation;
• Press MODE key again to select new
measurement mode.
Tips:
Press the MODE key one by one will toggle back and forth between the length,
area, volume and length measurement. If there is datum on the display before
pressing MODE key, first pressing the MODE key will clear the current datum, and
the mode will be invariable.
" is displayed on the LCD,