Hunter Energy Star 82033 Guia De Instalacion página 9

B10 B11
Connect 6" duct and vent to the outside. Use duct tape to
Install the wiring and the strain relief into the wiring access
secure joints. If ducting does not fit securely, an adapter
hole you made earlier.
may need to be purchased.
Section C - Existing Construction – accessible from above
C1
NO EXISTING FAN
OR
Remove an existing fan and check to make sure the opening
is large enough to accommodate the new fan housing. The
opening needs to be 11" x 9 5/8".
9
43044-01 03/05/2008