Setting Up Your Tv; Selecting A Location - Dynex DX-LCD19 Guia Del Usuario

12
No. Button
3 PICTURE
4 Numbers
5
6
7 ENTER
8 VOL+ and VOL–
9 CCD
10 MTS/SAP
11 Power indicator
12 INPUT
13 ZOOM
14 AUDIO
15 GUIDE
16 DISPLAY
17 EXIT
18 MENU
19 RECALL
20 CH+ and CH–
21 TIME
22 SLEEP

Setting up your TV

Selecting a location

• Place your TV on an open table or bench in a location where light does not shine
directly on the screen.
• Make sure that your TV is far enough from walls to allow for correct ventilation.
Inadequate ventilation may cause overheating, which may damage your TV.
• For information about mounting your TV on a wall, contact Dynex.
Description
Press to select the picture mode.
Press to enter channel numbers.
Press to select digital channels. For example, press 3,
press this button, then press 1 to select digital channel
3.1.
Press to make selections or change options in the OSD.
Press to confirm a selection in the OSD or to return to a
previous OSD menu.
Press to increase or decrease the volume.
Press to select a closed caption mode.
Press to select the sound mode. You can select Mono,
Stereo, or SAP (second audio program).
Lights when you press a button.
Press to select the video mode. You can select TV, Video,
S-Video, Component, HDMI, or VGA.
Press to select the aspect ratio. You can select Auto,
Normal, Letterbox, or Panorama.
Press to select the sound mode. You can select Rock,
Pop, Live, Dance, Techno, Classic, or Soft.
For ATSC tuners, press to display an electronic program
guide (EPG).
Press to show video source.
Press to close the on-screen display (OSD).
Press to open the on-screen display (OSD).
Press to go to the previously viewed channel.
Press to go to the next higher or lower channel.
Press to display the current time.
Press to set the sleep timer.
Setting up your TV