Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
22
Memorizing channels
When you first set up your TV or if you move your TV to a different geographical location, you
should scan for (memorize) channels. Your TV searches for all channels in your area that have
a signal, then stores the channel information in memory. When you press CH+ or CH– to
change channels, your TV skips the channel numbers that do not have signals.
To memorize channels:
1 Make sure that you have selected the TV signal source. For more information, see
"Selecting the TV signal source" on page 21.
2 Press MENU. The on-screen display (OSD) opens.
3 Press
4 Press
Deleting channels from memory
After you scan for channels, you can delete a channel from memory if you want to skip the
channel when your press CH+ or CH–. You can still select the skipped channel using the
number buttons.
To delete a channel from memory:
1 Select the channel you want to delete.
2 Press MENU. The OSD opens.
3 Press
4 Press
memory.
Changing channels
To change channels:
• Press CH+ or CH– to go to the next higher or lower channel.
• Or, press the number buttons to select a channel. For example, to select channel 120,
press 1, then 2, then 0.
• Or, press RECALL to go to the last viewed channel.
Selecting digital sub-channels
A main digital channel may have a sub-channel.
To select a digital sub-channel:
• Press the number buttons for the main channel, press , then press the number
button for the sub-channel. For example, to select channel 3.1, press 3, press , then
press 1.
Adjusting the volume
To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the volume.
• Press Mute to turn off the sound. Press Mute again to turn the sound back on.
or
to highlight TV, then press
or
to highlight Channel Scan, then press
or
to highlight TV, then press
or
to highlight Channel Skip, then press
Using your TV
to enter the TV menu.
to start the scan.
to enter the TV menu.
to delete the channel from
Publicidad
Capítulos
Tabla de contenido
