Getting Started - HoMedics Brethe AR-NC01 Manual De Instrucciones E Información De Garantía

Operating Instructions

Getting Started

• Take the air cleaner out of the box and remove the clear protective plastic bag.
• Place the air cleaner on a firm level surface.
• BEFORE TURNING ON THE AIR CLEANER, if you choose to use the optional
VOC filter, you will need to install it and confirm that all the filters are firmly in place.
Fig. 1
Fig. 2
Fig. 3
1. Open the rear grill by gently pushing
the release tabs toward the outside of
the unit. See Fig. 1
2. Pull the grill away from the body until
the tabs at the bottom of the grill
plate easily slide away from the unit.
See Fig. 2 & 3
6
Fig. 4
TABS TABS
Fig. 5
Fig. 6
NOTE: Unit will not operate unless nano-coil, pre-filter and grill are properly
installed.
3. The pre-filter and nano-coil filter
will be installed already. To install
the VOC/Odor filter (optional), remove
the VOC/Odor filter from the plastic
bag. Place the VOC filter into the
unit flush against the pre-filter,
secured by four clips. See Fig. 4
4. Place the tabs at the bottom of the
grill plate into the base of the unit.
See Fig. 5
5. Hold engaged bottom of the grill
plate in place and push the top of
the grill plate back toward the unit.
The release tabs at the top of the grill
will click back into place. See Fig. 6
7