Pre-Filter
Fig. 14
Fig. 15
Fig. 16
1. Open the rear grill by gently pushing
the release tabs toward the outside of
the unit. See Fig. 14
2. Pull the grill away from the body until
the tabs at the bottom of the grill
plate easily slide away from the unit.
See Fig. 15 & 16
1 2
3. If you are using the VOC filter, remove
it by sliding out of the 4 clips.
See Fig. 17
4. Remove the pre-filter by gently pulling
it off and away from the 4 posts.
See Fig. 18
Fig. 17
5. Use the brush attachment with your
vacuum cleaner. Run the attachment
along both sides of the pre-filter.
See Fig. 11
6. Replace the pre-filter by pushing the
4 loops of the filter onto the 4 posts
of the grill. See Fig. 18
Fig. 18
7. If you are using the VOC filter, put it
back in and secure with 4 clips.
See Fig. 17
1 3