Operating The Remote - LUCCI Airfusion Girona Instrucciones De Instalación

Airfusion Girona Installation Instructions

OPERATING THE REMOTE:

Before you start using the remote, take the time to read through this section and get familiar with the
buttons and function of each button (Fig. 8).
1. IR TRANSMITTER
2. HI button: Press this button to set the fan to run at High speed.
3. MED button: Press this button to set the fan to run at Medium speed.
4. LOW button: Press this button to set the fan to run at Low speed.
5. OFF button: Press this button to turn OFF the fan.
6 / 7 / 8. 1Hr / 3Hr / 6Hr fan timer button: Press this button to activate the fan timer fuction, the fan will turn
off after running for 1 hour / 3 hours / 6 hours.
1. LIGHT button: Press this button to turn the light ON/ OFF.
The remote has memory function. If the fan or light is turned off by the isolating switch, it will memorise
and recover the last status when turned on next.
Effective distance/location for IR remote control (Fig. 9)
Left from centre-line: Approximately 45 degrees
Right from centre-line: Approximately 45 degrees
Distance from remote control to receiver: 5 metres max.
9 | P a g e
Fig.8
Fig. 9
V e r 2 . 0