Finishing The Installation - LUCCI AIRFUSION CLIMATE III Manual Del Usario

Airfusion Climate III Installation Instructions
HANGING THE FAN (Fig. 9)
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned on
the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.9)
INSTALLATION OF THE CANOPY (Fig.10)
Ensure the earth wiring is secure and correct, by performing an earthing continuity test from the fan's
1.
accessible metal body back to the earth terminal at the terminal block on the mounting bracket.
2. Loosen the 2 screws at the bottom of the mouthing bracket.
3. Slide the canopy up to the mounting bracket and align the key holes on the canopy with the screws on the
mounting bracket. Turn the canopy until it locks into place with the narrow section of the key holes and
secure it by tightening the two screws. Avoid damaging the electrical wiring prepared previously.
INSTALLATION OF THE BOTTOM COVER (Fig.11)
1. Install the bottom cover to the motor part if no light kit is required.
10 | P a g e
Fig. 9

FINISHING THE INSTALLATION

Fig. 10
Fig. 11
V1.1-EU (10/ 2019)