Percent Weighing; Check Weighing - OHAUS DEFENDER 500 Manual De Funcionamiento

AVERAGE PIECE WEIGHT (APW)
When the FUNCTION MODE button is
CLr.PW Pcs
released,
CLEARING A STORED APW
1. Press the YES button to clear the stored APW.
RECALLING A STORED APW
1. Press the NO button to recall the existing APW.
NOTE: Press the FUNCTION
MODE button to temporarily
display the APW value.
2. The display shows the sample size
PUt 10
Pcs.
ESTABLISHING A NEW APW
1. Press the NO button to increment
the sample size. Choices are 5, 10,
20, 50 and 100.
2. To establish the APW, place the specified quantity
of samples on the scale and press the FUNCTION
MODE button to capture the weight.
3. APW
is displayed shortly followed
by the APW value with the current
unit of measure.
BEGIN COUNTING
1. Place the parts on the scale and
read the count. If a container is
used, be sure to tare the empty
container first.

PERCENT WEIGHING

Use this mode to measure the weight
of a sample as a percentage of a
reference weight.
PAGE 7 OF 32
OPERATION CONTINUED
is displayed.
APW
0.123
APW
PErCNt
REFERENCE WEIGHT
When the FUNCTION MODE button is
CLr.rEF%
released,
CLEARING A STORED REFERENCE WEIGHT
1. Press the YES button to clear the stored reference
weight.
RECALLING A STORED REFERENCE WEIGHT
1. Press the NO button to recall the existing reference
Pcs weight.
NOTE: Press the FUNCTION
MODE button to temporarily
kg
display the reference weight.
ESTABLISHING A NEW REFERENCE WEIGHT
The display shows
1. To establish the reference weight,
place the sample on the scale
and press the FUNCTION MODE
button to capture the weight.
rEF.Wt
is displayed shortly
followed by the value with the
current unit of measure.
BEGIN PERCENT WEIGHING
1. Place the sample on the scale
and read the percent value. If a
container is used, be sure to tare
the empty container first.

CHECK WEIGHING

Use this mode to determine if
the weight of a sample is within
prescribed limits.
Pcs
CHECK WEIGHING LIMITS
When the FUNCTION MODE button is
CLr.rEF
released,
CLEARING STORED CHECK WEIGHING LIMITS
1. Press the YES button to clear the stored limits.
RECALLING STORED CHECK WEIGHING LIMITS
1. Press the NO button to recall the
stored limits.
NOTE: Press the FUNCTION
MODE button to temporarily
display the under and over
limit values.
is displayed.
Put.rEF %
.
is displayed.
CLr.rEF
%
0.123
kg
Put.rEF
%
rEF. t
12.345
kg
. 100.00
%
CHEC
CLr.rEF
kg
110.000
kg
120.000
kg
0521 IH-2289