Remote Control - GE AGQ12 Manual Del Propietario E Instrucciones De Instalación

About the controls on the air conditioner.
Features and appearance will vary.
Cool on
Fan
Only on
Controls
ON/OFF Pad
Turns air conditioner on and off.
Display
Shows the set temperature or time remaining
on timer.
Mode
Use to set the air conditioner to Cool or
Fan mode.
Increase
Use to set temperature when in Cool mode.
Fan Speed Pad
Use to set the fan speed to LOW (F1), MED (F2)
or HIGH (F3).
Do Not Operate in Freezing Outdoor Conditions
This cool-only air conditioner was not designed for
freezing outdoor conditions. It must not be used in
freezing outdoor conditions.

Remote Control

I
To ensure proper operation, aim the remote
control at the signal receiver on the air
conditioner.
I
The remote control signal has a range of
up to 20 feet.
4
Timer on
Air Conditioner Controls
L M
/Decrease Pads
Timer Pad
ON—When the air conditioner is off, it can be
set to automatically come on in 1 to 12 hours
at its previous setting. Each touch of the Timer
pad or the INCREASE L / DECREASE M pads
will set the timer in hours.
OFF—When the air conditioner is on, it can
be set to automatically turn off in 1 to 12
hours. Each touch of the Timer pad or the
INCREASE L / DECREASE M pads will set the
timer in hours.
To cancel the timer, press the Timer pad until
the display time disappears.
Remote Control Signal Receiver
I
Make sure nothing is between the air conditioner
and the remote control that could block the
signal.
I
Make sure batteries are fresh and installed
correctly as indicated on the remote control.
Remote Control