Product Maintenance; Main Brush - Proscenic CocoSmart 880L Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

Product Operation

1.Power on/off

Press the power switch to power on/off the robot.

(The power button is under the robot cover.)

2.Start auto cleaning

a.Make sure the power switch is on.(The power button is under the robot

cover.)

b.In standby mode, press

on the robot or remote control to start cleaning.

c.In sleep mode, you have to switch the sleep mode into standby mode firstly,

then press

to start auto cleaning.

Note:

·When power indicator turns solid green,the battery has been fully

charged.Start auto cleaning by pressing

·After completing the network configuration, you can use the APP to

remotely enable cleaning, scheduled cleaning, and etc.

·Robot will not start clean when the battery is too low;

·Please take away all wires on the ground before cleaning to avoid

power failure or damage to furniture.

·When the battery is low in the middle of cleaning, the robot will

automatically return to the charging stand.

Robot starts by scanning the house, generating

maps, and intelligently dividing the house into

different sections. In each section, the robot will

firstly clean in a zigzag pattern，and then clean

along the wall. The robot completes the cleaning

of each section in an efficient and orderly way.

After cleaning, The device will automatically return

to its base to get charged.

5.Pause

Press

to pause the robot from cleaning.

6.Failure State

When the robot has an error, Clean Button "

or Recharge Button "

also hear a voice prompt.

·See troubleshooting for solutions,in Page 10.

No operation after 5 minutes in failure state,the robot will automati-

cally enter sleep mode.

7.Disassemble the water tank in the middle

of cleaning.

If you want to add water in the middle of clea-

ning, please stop the robot by pressing

of the robot.After adding water and reassemble

the water tank,please press

cleaning.

8.Vacuum Suction Strength

Choose quiet, standard, or strong mode by app

or remote control. The default is standard mode.

9.DND mode(Do-not-disturb mode)

During the DND period, the robot does not aut-

omatically resume work and actively play the vo-

ice. DND mode is enabled by default in the fact-

ory, and its opening time is 22:00-07:00.Please

disable DND mode by app.

on the robot or APP.

" blinks, and you will

to continue

3.Standby

Standby means robot has its power switch on,

waiting for the user's operation. It can be changed

to standby mode by one of the following methods:

During robot cleaning, press

or the remote control to enter standby mode.

4.Sleep

In order to save power, you can turn the robot into

sleep mode from standby mode.

a.Press

on the remote control to make robot enter or exit sleep mode.

b.You can also press and hold

mode, and press

on the robot surface to make robot exit sleep mode.

c.Robot will automatically enter sleep mode if no command is received for more

than 5 minutes.

d.The robot will not automatically enter sleep mode while being charged by

charging base.