GE PZS22MMKES Manual Del Propietario E Instrucciones De Instalación página 38

Inserting the door panels
Read these instructions completely and carefully.
1. Insert the Freezer Panel and Fresh Food Panel.
behind the door handle. Push the filler panel (required with
some door panels) in behind the decorator panel. Repeat
for fresh food panel.
2. Insert the Bottom Freezer Panel (on dispenser models).
Carefully push the panel in until it slides into the slot behind
the door handle. Push the filler panel (required with some
door panels) in behind the decorator panel.
3. Attach the Top Trim on the Freezer and Fresh Food Doors.
The Top Trim can be found inside the refrigerator
compartment.
With a T-20 Torxdriver, attach the Top Trim, using two
screws on each Top Trim piece, to the top of each door.
38
Top Trim Screws
Top Trim Screws
Cut-Out
Top
Panel
Bottom
Panel
Side Trim
Hand tighten only. Make sure that the top of each panel fits
snugly behind the lip of the Top Trim.
Cut-Out
Panel
Side Trim
49-60647 Rev. 8