English
Mechanical
protection
Supply
To order
Delivery
Spare parts and
accessories
Warranty
Warranty
Maintenance
Battery and fuse
change
Changing the
battery
Multimeter MX1
•
Watertightness (EN 60529/A1 - 2000)
•
Protection index: IP65
•
1 MX1 multimeter
•
1 set of 2 leads with tips
•
4 fuses, 2 spares
•
1 fitted 1,5V battery
•
1 instructions leaflet
•
1 strap on the back of the casing
•
1 LR6 1,5V battery
•
1 HPC fuse 1,6A / 6,3x32 / 600V / 50kA
•
1 HPC fuse 10A / 6,3x32 / 600V / 50kA
Different measurement accessories widen the scope of application or
provide the altimeter with new functions.
Documentation on request.
•
Current clamp : ratio 1000/1 (MN08) .......................... P01120401
•
Carry case 240 x 230 70mm with strap
•
Set of leads with tips
•
Set of crocodile clamps
•
30kVDC high voltage probe, ratio 100/1
Our warranty lasts three years for the multimeter and one year for the
accessories after the delivery date except for express stipulations (extract
from our General Sales Terms provided on request).
Only use the specified spare parts for maintenance. The manufacturer shall
not be held liable for any incident occurring following repairs carried out by a
party other than its after-sales service or approved repairers.
Opening the multimeter:
Open the device by removing the measurement leads and taking out the four
screws on the back. Remove the lower part of the casing.
Open the device. Change the battery if the buzzer does not function when the
VW and COM inputs are in short-circuit on the W x 1 calibre. Ensure that the
battery is the right way up.
.................................................. P01296033
..................... P01298033
............................................... P01295084
........................................... P01101848
MX1
.................. AT0071
................... AT0070
................... HT 212
19