Troubleshooting - Promaker PRO-LO180 Manual Del Usuario

operation.

TROUBLESHOOTING

POSSIBLE
PROBLEM
CAUSE
• Cord
not
plugged
in.
• Circuit
fuse is
blown.
Until will
not start
• Circuit
break-
er is
tripped.
• Cord
or
switch is
dam-
aged.
MAINTENANCE
Use only mild soap and damp cloth
to clean the tool. Never let any liquid
get inside the tool; never immerse
any part of the tool into a liquid.
IMPORTANT: To assure product
SAFETY and RELIABILITY, repairs,
maintenance and adjustment (other
than those listed in this manual)
should be performed by authorized
service centers or other qualified
service personnel, always using
POSSIBLE
SOLUTION
• Plug tool into a
working outlet.
• Replace circuit fuse.
(If the product
repeatedly causes the
circuit fuse to blow,
discontinue use
immediately and have it
serviced at a
PROMAKER service
®
center or authorized
servicer.)
• Reset circuit breaker.
(If the product repeated-
ly causes the circuit
breaker to trip,
discontinue use
immediately and have it
serviced at a
PROMAKER service
®
center or authorized
servicer.)
• Have cord or switch
replaced at
PROMAKER Service
®
Center or
Authorized Servicer
identical replacement parts.
ACCESSORIES
WARNING: Since accessories,
other than
PROMAKER ,
®
tested with this product, use of such
accessories with this tool could be
hazardous. To reduce the risk of
injury, only
recommended accessories should
be used with this product. A
complete line of accessories is
available from your PROMAKER
Service Center or a PROMAKER
Authorized Warranty
Center. Please visit our Web Site
www.promakertools.com
catalog or for the name of your
nearest supplier.
those offered
have not
PROMAKER
Service
for
by
been
®
®
®
a
12