Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
When using an extension cord, be
sure to use one heavy enough to
carry the current your product will
draw. An undersized cord will cause
a drop in line voltage resulting in
loss of power and overheating. The
following table shows the correct
size to use depending on cord length
and nameplate ampere rating. If in
doubt, use the next heavier gage.
The smaller the gage number, the
heavier the cord.
Minimum Gage for Cord Sets
Volts
120V
0-25
26-50
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
Ampere Rating
More Not more
Than Than
0
-6
18
Functional Description
1. On/off switch
2. Palm grip
3. Dust bag assembly
4. Dust chute
Total Length of Cord in Feet
51-100
101-150
American Wire Gage
16
16
14
5. Sandpaper clamp
6. Sandpaper clamping lever
7. Backing pad
8. Cooling vents
9. Sandpaper hole punch
10. Sandpaper
SAFETY
INSTRUCTIONS: SANDERS
• ALWAYS USE PROPER EYE AND
RESPIRATORY PROTECTION.
• Clean your tool out periodically.
• Do not operate the unit without the
dust collection bag assembled to
the unit.
• Empty dust bag frequently,
especially
resin coated surfaces such as
polyurethane, varnish, shellac,
etc.
Dispose
particles according to the finish
manufacturer's guidelines, or place
in a metal can with a tight-fitting
metal lid. Remove coated dust
particles from the premises daily.
The accumulation of fine sanding
dust particles may self ignite and
cause fire.
OTHER IMPORTANT SAFETY
WARNINGS AND INSTRUCTIONS
SANDING
SANDING LEAD BASED PAINT
Sanding of lead based paint is
WARNINGS
when
sanding
of
coated
AND
dust
6
Publicidad
Tabla de contenido
