Promaker PRO-LO180 Manual Del Usuario página 5

not recommended. See Sanding
Lead Based Paint for additional
information before sanding paint.
• Clean your tool out periodically.
WARNING: Some dust created
by power
grinding, drilling,
construction activities contains
chemicals known to the State of
California to cause cancer, birth
defects or other reproductive
harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks
and cement and other masonry
products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work
in a well ventilated area, and work
with approved safety equipment,
such as those dust masks that
are specially designed to filter out
microscopic particles.
• Avoid prolonged
with dust from power sanding,
sawing, grinding, drilling, and
other construction
Wear protective clothing and
wash exposed areas with soap
and water. Allowing dust to get into
your mouth, eyes, or lay on the skin
sanding, sawing,
and other
contact
activities.
may promote absorption of harmful
chemicals.
SYMBOLS
The label on your tool may include
the following symbols. The symbols
and their definitions are as follows:
V Volts
A Amperes
Hz Hertz
W Watts
min minutes
alternating current
or AC
direct current
or DC
n o
no load speed
Class I Construction
(grounded)
Earthing terminal
Class II Construction
(double insulated)
Safety alert symbol
Revolutions or
/Min or
reciprocation per
rpm
minute
Read instruction
manual before use
Use proper
respiratory protection
Use proper eye
protection
Use proper hearing
protection
5