JANE Step nurse Manual De Instrucciones página 27

GB
4
4. Install child car seat and secure child for Group II (15-25kg) and III (22-36kg)
There are two options to fix child car seat for which please find below.
• Install child car seat with ISOFIX connectors and 3 point vehicle belt
a.
• Install child car seat with 3 point vehicle belt
b.
4.1. Remove 5 point harness system.
4.1.1 Press central adjuster with one finger, in the meanwhile pull shoulder belts with another hand until
it can't be pulled. Open buckle and remove shoulder belts from T-bar,remove two latches from shoulder
belts. (fig. 29).
4.1.2 Remove crotch pad, backrest cover and below part and store shoulder belts under EPE foam on
seat base. (fig. 30)
4.1.3 Keep shoulder pads in child car seat. Put T-bar in the plate on backrest. Engage two latches in
buckle and store the buckle in the storage place in seat base.Then put on soft cover. (fig. 31)
4.2 Install child car seat with ISOFIX connector + 3 point vehicle belt.
4.2.1 Install child car seat.
4.2.1.1 Pull reclining lever and adjust backrest to position 1 ONLY. (fig. 32)
ATTENTION!
Only position 1 is allowed to use for Group II, III.
4.2.1.2 Insert both ISOFIX connectors into ISOFIX anchorage until you hear clear "click" and ISOFIX
connector indicator show green color. Push child car seat to fit vehicle backrest closely. (fig. 33).
4.2.2 Secure child in child car seat.
4.2.2.1 Place child in child car seat, adjust headrest height to make shoulder belt slightly higher than
child shoulders.
4.2.2.2 Guide diagonal belt section of 3 point vehicle belt through diagonal belt guide and guide lap
belt section through lap belt guide. Insert buckle tongue into vehicle buckle until you hear a clear "click".
(fig.34)
Note: Any slack and twist of vehicle belt is not allowed for installation.
4.3 Install child car seat with 3 point vehicle belt.
4.3.1 Install child car seat.
4.3.1.1 Place child car seat in vehicle seat facing forward. Pull reclining lever to adjust backrest to position
1. (fig. 35)
ATTENTION!
Only position 1 is allowed to use for Group II, III.
4.3.2 Secure child in child car seat.
4.3.2.1 Place child in child car seat, adjust headrest to make shoulder belts slightly higher than child
shoulders.
4.3.2.2 Guide diagonal belt section of 3 point vehicle belt through diagonal belt guide and guide lap
belt section through lap belt guide. Insert buckle tongue into vehicle buckle until you hear a clear "click".
(fig.36)
Note: Any slack and twist of vehicle belt is not allowed for installation.
IM 2076,02 STEP 95x135 ins.indd 27
Direction
Install child car seat
Secure child in child car seat
Direction
Install child car seat
Secure child in child car seat
Forward facing ONLY
ISOFIX connectors + 3 point vehicle belt
3 point vehicle belt
Forward facing ONLY
3 point vehicle belt
3 point vehicle belt
27
11/4/19 17:12