Sirius FSED Manual De Instrucciones página 18

SEM 9 (fig. 19)
The appliance is designed to exhaust fumes and odours very silently and in the best way. It must
be installed in the house and connected to the cooker-hood, which is in the kitchen (fig. 19).
Roof installation: make a square opening in the roof for a square pipe with dimensions
180x180mm.
Put the two brackets as shown in fig 20 and mark the holes you are going to drill
Insert the stainless steel pipe trying to match the opening realized (fig. 21) making sure that the
pipe comes out of the roof just to enable the installation of the SEM 9 (fig. 22).
Should you need both the pipes, take into account that they are telescopic and fix them through
the 8 screws supplied (fig. 23).
Make sure that the stainless steel pipe is in a vertical position. Then make the holes matching
the holes in the brackets (fig. 24), Fix the pipe to the roof using the 6 screws supplied (fig. 24).
Use a round pipe at least 10cm longer than the stainless steel pipe and fix it to the flange of the
SEM9 through a hose clamp (fig. 25).
Insert the SEM 9 with the round pipe inside the stainless steel previously fixed to the roof,
making attention to let the electrical cable pass inside the stainless steel pipe (fig. 26). Fix the
motor to the pipe through the 8 screws supplied (fig. 27).
Connect the round tube to the pipe of the kitchen.
Electrical connection: connect the electrical cable of the motor to the product installed in the
kitchen (fig. 14).
18